OneUp Components - EDC Tool (Bicycle)

Utilize that empty space in your steer tube and get the tools off your back with the OneUp Components EDC Tool. The EDC (Everyday Carry) is a brand new storage solution for your tools that utilizes the empty space in your bicycle fork's steer tube. Keep your tools descretely hidden while carrying everything you need for service on the side of the trails. The plastic cylinder housing is durable and includes a multi-tool, a chain tool, tire levers. There is even a space for a C02 Cartridge! 

Don't get caught out on the trail without the proper tools. Get the weight out of your pack and keep the tools hidden out of sight with the OneUp Components EDC Tool, the Macgyver of bicycle tool kits!

Be sure to check to see if your fork is compatible with the EDC Tool, CLICK HERE 
**Not for use on Carbon Forks. Alloy steerers only
 

Fork Notes:

A – Total Steerer Tube Length - Steerer tube length measured from bottom of crown to top of the steerer must be 183-230mm long (7.25-9.00″). Use a tape measure to check length.
B – Steerer Tube Star Nut Diameter - The inner diameter must be between 24.25 mm-24.80 mm. To check, this will require a good set of calipers.

OneUp EDC Tool Features:

• Tool hides inside any 1-1/8" threadless steerer, held snug by o-rings
• Use EDC tap to thread alloy steerer for special EDC headset preloader top cap
• 2,3,4,5,6,8 hex keys, T25 Torx, flathead screwdriver, skoke keys, tire lever, lockring tool and chain tool are housed in a plastic cylinder (with room for a quick link)
• A second cylinder screws onto plastic tool cylinder for extra storage (or a Co2 can be threaded in place of the second cylinder)
• Alternatively, the tool can also fit inside the EDC pump rather than the steerer