Troy Lee Designs - GP Pro Blends Jersey
The GP jersey has always been built upon an undeniably solid foundation. The 2023 GP Pro version goes further than any of its predecessors by improving that foundation and adding to it. We started by integrating our "Ladder" mesh in key areas of the upper side panels as well as the sleeve bottom to allow heat to escape those zones more efficiently.
Next, we improved the look, fit and functionality of the collar. Finally, we revamped the body styling lines and shapes to give you our best fitting and performing GP jersey-the all new 2023 GP Pro.
Features:
- Ride Fit
- Heat sealed, folded front & low profile rear "race" collar with improved fit & comfort
- "Ladder" mesh fabric construction throughout body for improved ventilation
- Semi-athletic fit-not overly loose of excessive, but not tight
- Silicone printed tail keeps the jersey tucked in
- 100% Poly Air Mesh at ventilation panels
Troy Lee Designs - GP Pro Blends Pant
Tested performance and proven quality at a value are synonymous with the TLD GP line. This years GP Pro pant is no different. This pant is tasked to take the abuses of the track but also offer the kind of performance you normally see in expensive moto kits. The evolution of this years GP Pro pant is a step up from previous models in every way.
Tough 600D polyester main body construction, heat and abrason resistant leather inner knee panels coupled with strategically placed stretch panel accents reinforce this pant in high wear areas while simultaneously allowing max flexibility and movement. New for 23 is our side seam, stealth pocket with a custom TLD zipper pull and zipper garage. The 2023 GP Pro pant-tougher, lighter and faster in all facets.
- Ride Fit
- Internal Pocket w/ Half Covered Ziper Garage & custom YKK Zipper/Zipper Pull
- 600D Poly Canvas
- 600D Reinforced Seat Panels
- Spandex 2-way Stretch and 4-Way Polyester Stretch
- Lightweight 3mm Thick Matte Heat Transfer Logos
- Heat and Anti-Abrasion Cowhide Leather Inseam Panel
- Cow-Hide Inside Knee Leather Panels
Troy Lee Designs - Air Gloves
The Troy Lee Designs Air Gloves are the legacy build of TLD’s Air glove platform. A vented Clarino® palm keeps lever feel sharp, lycra mesh on the backhand keeps things cool, and 3D sonic-welded TPR graphics. An Air-prene cuff with TPR wrist closure secures the fit.
Why We Like It:
More backhand coverage than the newer single-layer Air, while still keeping airflow strong through the lycra mesh and palm vents. The TPR wrist closure stays snug without digging in.
Why It’ll Work for You:
Best for riders who want a little more knuckle protection than the second-skin Air without going to a full Pro-level glove. Pairs naturally with any GP or GP Pro kit.
Key Features:
- Silicone screen-printed graphic on palm for grip
- Lightweight breathable lycra mesh on backhand
- Vented .08 Clarino® palm panel
- Breathable Air-prene cuff
- 3D sonic-welded TPR graphics for protection
- 3D modified TPR wrist closure
- Cool air-mesh lycra in fourchettes
Leatt - Velocity 5.5 Iriz Goggle (Sale)
The Leatt Velocity 5.5 Iriz Goggle is made for clear vision, roost protection and bright-conditions performance.
It uses a bulletproof 170° WideVision permanent anti-fog double lens, Iriz mirror coating, triple-layer face foam, outriggers and OTG compatibility.
Why We Like It
The Iriz lens is the big win here, cutting visible light with a mirrored finish while keeping the wide Leatt field of view.
Why It'll Work for You
Use it for moto or off-road riding when you need anti-fog visibility, helmet compatibility and a comfortable face seal.
Complete The Kit
Round out your ride gear with Leatt jerseys, Leatt gloves, or the latest Sales on Leatt gear.
Key Features
- Bulletproof 170° WideVision permanent anti-fog double Lens
- Iriz lens Blocks more of the visible light using a mirror coating
- Blocks more of the visible light using a mirror coating
- Roll-Off ready for our WideVision 48mm system (optional)
- Triple-layer, dual-density comfort face foam and anti-sweat fleece backing
- Self-draining open lower frame design allows dirt to fall from lens
- Out-riggers with a 45mm anti-slip coated strap
- Tapered custom shape to even fit helmets with tighter eye ports
- OTG - Over-the-glasses fit
- Tear-Off ready with posts. Tear-off pack included
- Bulletproof Lens impact tested to: ANSI Z87.1-2015 Military Ballistic Impact Standard (MIL-DTL-43511D)
- ANSI Z87.1-2015
- Certified CE EN 1938 :2010
- Complies with PPE Regulation (EU) 2016/425
- Optional lenses available from 22-83% light transmission (VLT)
- Plastic-free packaging
Troy Lee Designs - SE5 Composite Team Matte Helmet
Built for motocross and off-road riding, the SE5 Composite Team Matte Helmet delivers race-level protection with a fit that feels right the moment you pull it on. This is a purpose-built dirt bike helmet designed to stay stable at speed, absorb hard hits, and keep you comfortable through long motos and trail days.
The wide eye port gives you clear peripheral vision for tracking ruts, lines, and riders around you. Weight is well balanced so the helmet stays planted under acceleration, braking, and landings without stressing your neck. Venting is aggressive and directional, pulling air through the helmet at low and high speeds to manage heat without excess wind noise.
Why We Like It: It feels dialed immediately. The fit is secure with no pressure points, the balance is spot on, and the helmet disappears once you start riding.
Why It’ll Work for You: It is easy to live with. The liner and cheek pads come out for washing, the visor hardware is simple to replace, and the matte finish cleans up fast between rides.
Variants / Options: Multiple sizes and colorways available. Use the selector to see current inventory.
Key Features:
-
Plush SE5 helmet bag with zippered storage pocket
-
Extra graphic-matched visor
-
Spare visor hardware and emergency medical information sticker
-
Weight: 1350 g DOT and ECE, 1160 g ECE only
-
Fiberglass and carbon fiber shell with three shell sizes
-
MIPS Integra rotational impact system
-
Dual-density EPS impact liner
-
X-Static and XT2 comfort liner
-
Quick-release 3D cheek pads
-
EPP inner chin bar and collarbone relief zones
-
Titanium D-ring closure
-
DOT and ECE certified
-
Directional ventilation gills and breakaway visor screws
This helmet is built to take real dirt bike abuse and keep you confident every time the gate drops.
