Motorcycle Tools

FMF - Exhaust Wash Plug:
Protect the inside of your expensive exhaust system with an FMF Exhaust wash plug. Keeps water and debris out as you wash or store your bike.

PC Racing  - Fork Support:
Features: Sized to fit 80cc up to the big bores
Stabilizes bike during transportation
Keeps bike strapped down tight without damaging fork seals
Bikes won’t bounce off tiedowns, preventing damage to motorcycles or vehicle
Fits all bikes with 11 inches or more of travel
Polycarbonate...

Motion Pro - Folding Sag Scale 2
Folds up for easy storage
Makes setting sag on todays MX bikes a snap
 

 Motion Pro - Rim Shield II :
New and improved version of original Rim Shield
Now made with genuine DuPont Zytel Super Tough nylon resin for unmatched strength and durability
Prevents rim damage from tire levers during tire changes
Dual raised beads facilitate inserting tire lever under tire bead and prevents...

Motion Pro - Ringer Fork Seal Driver
Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers
Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use
No more worrying about part of the tool falling...

Motion Pro - Single Shock Nut Spanner
• Heat-treated alloy steel
• Designed for shop use

Motion Pro Drive T-Handles #PC008158 
Use any 1.4" drive attachments such as sockets, hex drive, crow's foot or swivels Lifetime replacement warranty.
1/4" (8.5" long)

Motion Pro - Fork Cap Remover Wrench
49mm, 8 point box wrench for removing the fork cap (cartridge) on dual camber closed cartridge forks on late model Yamaha's and Honda's (2010 Honda CRF250R uses 57-8236 Fork cap wrench).
50mm, 6 point box wrench for removing the fork cap (cartridge) on...

 Motion Pro - Motospade:
Made of durable ABS plastic
Ergonomic handle
Two ended design for ultimate versatility
Curved spade for the big stuff
Brush head for cleaning radiator and controls with tip for foot pegs and hard to reach areas
Hanging hole for easy storage in the garage
Patented design
...

Pro Circuit - Exhaust Plug:
An essential item when washing your dirt bike, the Pro Circuit Exhaust Plug helps to prevent water and mud from leaking into your exhaust system. Water getting inside your exhaust system and onto your packing could cause damage to the entire system. Not only great...

MOTOCROSS BOLT PACK
Japanese Pro Pack-
• Ideal for the serious racer / mechanic
• Over 170 piece of factory style hardware
• Kit comes in durable, divided organizer
• Not for CRF's
Japanese Track Pack II-
• Best selling and most popular fastener kit in the industry
• 54...

Motion Pro Hooked Spring Puller
• Used to remove exhaust pipe springs, Seat or Tank holding springs, Cotter pins, side stand springs and other parts.
• Made in the USA.

Motion Pro - Combo Axle Wrench-Tire Tool 3/8 Breaker Bar
• Select your Wrench Size (Single Wrench)
• Add the adaptor to convert your wrench into a breaker bar 
• **Adapters Sold Separately** 
• Made from 7075 T-6 Aluminum
• Lightweight, perfect for any fanny pack
• 3/8 drive adapter...

Motion Pro 11-Slot T-Handle Rack
Easily hangs on the side of most tool boxes
Keeps T-handles ready for action

Matrix - M52 Oil Funnel
THE ULTIMATE STORAGE FUNNEL KEEPS THE DRIPS IN AND THE DIRT OUT
• Caps eliminate spills and contaminants.
• Flex shape makes it easy to get to hard to fill filler opening.
• Made from strong durable chemical resistant polyethylene.
• Reduces debris from contaminating...

FITS 125cc Bikes and UP:
Risk Racing - Lock-N-Load System:

The Lock-N-Load securely holds your motocross bike into your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up...

Motion Pro - T6 Combo Lever Set:
• Tire spoon with axle nut hex wrench and tire spoon hex wrench for rim lock nut set
• Both levers have perfectly contoured tire lever on one end
• One lever has unique combination stepped 12/13mm box end wrench on other end...

Nothing is better than a good T- handle set. That's why Motion Pro's Vanadium Steel 8 piece set has six point deep sockets and a sturdy and handy poly storage bag. It's the perfect gift for any mechanic in your shop or house. Sizes include: 8, 10, 12, 13, 14,...

Motion Pro - Hydraulic Brake Bleeder
New Brake Bleeder will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system

 Motion Pro - Gear Jammer:
Locks gears in place for easy installation and removal
Allows tightening lock nuts to proper torque setting
Works on virtually any motor
Powerful magnet holds tool in place during use
Billet 6061 T-6 aluminum construction
Blue anodized finish with laser engraved Motion Pro logo
Originally...

Risk Racing - Holeshot Race Gate
Improve your reaction time and learn to control power out of the gate and into the first corner.  This innovative product allows riders to independently practice their starts.  When the rider presses the wireless remote button mounted on their handlebars, it will activate a...

MX 450 Tool Pack:
Prepare for anything when you wear the OGIO MX 450 Tool Pack on your next ride. Whether you're off-roading on your ATV or hitting the trail on your dirt bike, this tool pack ensures you're ready for any unexpected mishaps.
Tool Pack Features::
• Deluxe...

Motion Pro - Spinner II T-Handle:
• Available in 1/4" and 3/8" for versatility
• Bearing mounted spinner for faster removal and installation of bolts & nuts
• Chrome vanadium handle and shaft with durable chrome finish
• Blue anodized spinner with laser engraved Motion Pro logo
• 1/4" Shaft...

Motion Pro - Spoke Wrench
Features unique square end openings which grip the spoke nipple on all four sides instead of just two, assuring that the nipple corners are not rounded off during tightening
With many nipples being made from aluminum or brass, this square tool is important
Sizes are...

 Motion Pro - Steering Stem Bearing Tool:
Removes and installs tapered roller bearing at base of steering stem
Fits most motorcycles with tapered roller bearing at base of steering stem
Includes 26 mm, 28 mm, 30-31 mm, 35-36 mm race protectors for installing bearing race
Blue anodized bearing protectors are...

Motion Pro - Snap Ring Pliers
• Economical pliers that easily work with both inside and outside opening snap rings or clips
• Includes 3 extra sets of tips, 1 additional straight tip and 2 offset angled tips

 Motion Pro - Steering Head Bearing Race Driver:
Fits tapered steering bearings 41-42 mm, 47-48 mm, 51-52 mm and 55-56 mm
Innovative double sided drivers
Safely installs the tapered bearing race in the frame
Made of durable 6061-T6 anodized aluminum
Ergonomic handle
Laser etched for easy identification

Motion Pro - T-6 Float Bowl Wrench
Designed to remove 17mm float bowl drain plugs
Made from light-weight 6061 T-6
Compact design to carry in tool pack
12 point hex and low profile design for tight access

Moose Racing - Fuel Screw
• 7075 T7 aluminum construction and re-designed pin taper set this screw apart from the competition.
• Adjust your carb for better off-idle acceleration with just your fingers.
• Includes o-ring, washer, and heavy duty spring.
• FIts Keihin FCR carbs on modern dirt bikes.
...

 Motion Pro - Axis Truing Balance Stand:
Precision built tool for building, truing, and balancing wheels
Innovative single sided design allows easy access to spokes and nipples
High quality bearings allow precise wheel balancing
15 mm axle fits most modern street and dirt bikes and many mini bikes
Hub cones...

Bolt - Sport Bike Fastener Kit:
Pro Pack-
• Designed by extensively reviewing the needs of mechanics and riders at the dealership and at the racetrack
• Kit has over 250 pieces of premium factory style hardware
• Includes: socket head bolts, button head bolts, flange bolts, nylon removable rivets,...

Motion Pro - Pro Fill Air Chuck:
• Pivoting angled head design allows access to difficult to reach tire valves
• Unique design provides added hand clearance between filler and hot brake rotors
• Billet aluminum construction for light weight and precise fit and function
• 1/4" NPT female inlet...

Race Tech - Fork Seal Drivers
Split fork seal drivers save headaches and seals.
Fit both inverted and conventional forks.

Muc-Off - Helmet and Visor Cleaner:
Features:  Quickly removes dust, mud, insects, soot and oily residue from your helmet and goggles leaving a streak-free finish
Formulated using de-ionized water as recommended by many helmet manufacturers and it’s safe to use on all lens materials including polycarbonate
Quickly removes dust, mud, insects,...

Muc-Off - Visor, Lens & Goggle Cleaner:
Features:  Antibacterial - kills 99.9% of germs
Formulated using deionized water
pH neutral formula as recommended by helmet manufacturers
Free from solvents and harmful chemicals
100% biodegradable
Available in 30mL bottles

Matrix - M31 Worx Box
• Hi Impact plastic box with metal drawers creates a box that is lightweight yet strong.
• Two ultra smooth metal drawers with aluminum trim.
• The top features twin slide out parts and bolt organizers.
• Removable tool tray.
• 19.5 x 10 x...

Performance Tool - Cotter Pin AssortmentFeatures: Sizes: 1/16-Inch by 1-Inch 380 pcs, 3/32-Inch by 1-Inch 240 pcs, 3/32-Inch by 1 1/2-Inch 140 pcs
1/8-Inch by 1 1/4-Inch 115 pcs, 1/8-Inch by 2-Inch 75 pcs, 5/32-Inch by 2-1/2-Inch 50 pcs
Convenient resealable plastic case
Great for a variety...

Performance Tool - 3 Piece Step Drill SetFeatures: 1/4-Inch hex shank 3 bit set replaces 17 individual drill bits
Titanium nitride coated high speed steel
For use with metal, wood and plastic
Starts on contact, no center punch needed
Automatically deburrs holes as you drill
...

Performance Tool - Oil Filter PliersFeatures: • Slip joint design fits multiple size filters
• Textured grip
• Durable gripping teeth
• Fits sizes 1-3/4" to 4" in diameter

Performance Tool - Threaded Inserts RivetsFeatures: Used to Insert threaded rivet style fasteners into thin metal, plastic or fiberglass.
Includes 4 threaded mandrels and nosepieces: 3mm, 4mm, 5mm, and 6mm
Comes with 10 of each size aluminum threaded rivet-nuts.
Long handle with comfort grips.
Formed blow...

Performance Tool - Threaded Insert RiveterFeatures: • Used to insert threaded rivet style fasteners into thin metal, plastic or fiberglass
• Includes 4 threaded mandrels and nosepieces: 3mm, 4mm, 5mm and 6mm
• Comes with 10 of each size aluminum threaded rivet-nuts
• Long handle with comfort grips
•...

Performance Tool - Impact Wrench 1/2" Features: • Powerful rocking dog clutch 230 ft/lbs of torque
• Push button direction change for quick and easy operation
• Built-in air regulator for precise speed control
• Lightweight and durable cast aluminum housing
• Comfortable soft touch finish for improved comfort and...

Performance Tool - Impact Wrench 3/8"Features: • Powerful single hammer clutch 180 ft/lbs of torque - smooth and balanced operation
• Push button direction change for quick and easy operation
• Built-in air regulator with 5 torque settings for precise speed control
• Contoured handle for comfort and control
•...

Performance Tool - Impact Wrench 3/8" B-FlyFeatures: • Butterfly throttle for instantly changing directions
• Built in 9 setting regulator
• Air inlet swivels 360 degrees
• Compact and lightweight
• Ideal for engine and assembly work in tight places

Bikemaster - Offset Handle Ratchet SetThis high-quality, smooth action ratchet set features an offset-handle with a dimpled rubber grip for comfort and quick-release function. This set is constructed from industrial-grade steel that has been completely coated with an eye-catching polymer to protect the tool and your project. Ratchet set comes...

Motion Pro - MP ToolFeatures: • Removes 8, 10, 12, and 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Allen bolts
• 1/4 and 3/8 in. socket driver
• 10 mm and 12 mm 1/4 in drive sockets
• Includes...

Bikemaster - Palm Ratchet SetThe BikeMaster Palm Ratchet Set is made of high-quality chrome vanadium finish for a long life and features a knurled no-slip grip. The smooth action, compact design gets into hard-to-reach places and stores easily in a toolbox. Ratchet set comes with 1/4, 3/8 and 1/2 in....

Slime - Tire Plug Install KitsFeatures: • Comes in two options: T-Handle or Pistol Grip-style
• For tubeless offroad tires
• T-Handle style includes five plugs
• Pistol Grip-style includes eight plugs
• Rubber cement
• Refill with Slime Tire Plugs