- Customer Photos
Ride Engineering - One-Piece Bar Mount (Oversized)
Re-designed one final time to produce the lightest most resistive to twisting bar mount in our 9 year history. This one-piece 1 1/8” design removed 1 oz over the previous (GEN III) version while further increasing its strength and torsional resistance in the event of a crash. Precision machined from aircraft quality aluminum, with 3mm of adjustability forward or back. Re-sized to be the same height as the 2010 YZ450F bar mounts. Add the 10mm taller spacers to equal the 2010 250F height. Note: For use of this mount on the stock Yamaha triple clamp, a longer bolt kit will be necessary (P.N.: YZ-76175-KT see below). Make sure at least 8 theards are visible when the bolt is pushed through from underneath, although 11 is ideal. If less than 8 threads are engaged, purchase two 2" long 7/16 fine thread bolts and/or add/remove washers accordingly (With the stock clamps, its OK to remove both washers to achieve the desired height).
-This Item will use your existing mounting hardware and rubber cushions.
- For KX 250F 2015-2016, Bar mount ONLY fits rear position. To use the front position, you MUST purchase the mount for RM-Z250 08-16 (Part #RM-BBM08-CA)
- For KX 450F 2012-2016, Bar Mount ONLY fits rear position. To use the front position, you MUST purchase the mount for RM-Z450 08-16 (Part #RM-BBM08-CA)